Kinsler Handbook #32 May 2025

Kinsler Fuel Injection, Inc, 1834 THUNDERBIRD TROY, MICHIGAN 48084 U.S.A. www.Kinsler.com Phone (248) 362-1145 Fax (248) 362-1032 99 PRESSURE CHARTS HARD-ANODIZED 6 AN ALUMINUM (ANO-K TYPE VALVE) MAIN #3006 AND/OR SECONDARY #3030 WITHOUT JET SEALING O-RING INSTALLED HARD-ANODIZED 6 AN QUICK DISCONNECT TYPE VALVE ; #3104 AND #3112 WITH JET SEALING O-RING INSTALLED HIGH FLOW BRASS AND HARD-ANODIZED 6 AN ALUMINUM MAIN #3084 AND #3155 ; SECONDARY #3076 AND #3156 ; HIGH SPEED #3081 AND #3157 WITHOUT JET SEALING O-RING INSTALLED THESE CHARTS ARE FOR KINSLER VALVES ONLY, USING KINSLER SPRINGS. NOTE: A jet sealing o-ring in the jet can is equivalent to .060” worth of shims. Kinsler and Hilborn jets are equivalent to .183” of shims. PRESSURES MAY VARY SLIGHTLY. SPRING WIRE DIAMETER .015” .016” .017” .018” .019” .021” .024” .028” .032” .036” .039” .042” NONE 0.6 0.6 1.4 1.2 1.7 2.2 2.1 3.8 4.6 8.3 10.8 24.0 1-THICK 1.0 1.0 2.4 3.5 2.9 3.8 4.8 7.9 12.7 22.2 30.2 54.6 2-THICK 1.4 1.6 3.3 5.0 4.0 5.1 7.4 12.3 20.2 36.4 49.8 80.7 SPRING WIRE DIAMETER .015” .016” .017” .018” .019” .021” .024” .028” .032” .036” .039” .042” NONE 0.6 0.8 2.0 3.2 2.6 3.3 4.2 7.2 11.2 20.9 26.4 56.8 1-THICK 1.2 1.3 3.1 5.0 4.0 5.0 7.3 12.7 21.1 38.9 53.3 92.3 2-THICK 1.6 2.0 4.2 6.7 5.3 6.9 10.8 17.4 30.3 56.4 79.3 127.0 SPRING WIRE DIAMETER .015” .016” .017” .018” .019” .021” .024” .028” .032” .036” .039” .042” NONE 0.6 1.6 1.3 0.7 1.6 2.9 7.0 8.3 23.4 1-THICK 0.5 0.5 0.6 1.7 2.6 2.6 2.8 5.8 9.7 20.0 24.1 47.5 2-THICK 0.9 0.9 1.0 2.6 3.7 3.7 4.8 9.7 17.0 30.8 41.5 70.0 Pressure shown in PSI SHIM Pressure shown in PSI Pressure shown in PSI SHIM SHIM © 2019 DISCONTINUED